Connecting to the service
To connect the Cloud Direct Connect service, you need to arrange a communication channel.
There are two options for arranging the communication channel:
- You arrange the communication channel yourself.
- The communication channel is arranged by the VK Cloud team.
-
Review the technical requirements and limitations:
- Points of presence in data centers: You can request the current list of presence points from technical support or your personal manager via email at sales-team@mcs.mail.ru.
- Fiber type: Single-Mode (SM) only.
- Transceiver type: Duplex with LC connectors (connection requires two fibers in one communication channel).
- The VK Cloud switch port must receive exclusively tagged traffic (802.1Q Trunk Mode).
- MLAG/VPC technology is not supported on VK Cloud switches.
- LACP aggregation is only available within a single switch.
- A Layer 2 (L2) communication channel is connected to the cloud project.
-
Choose the communication channel parameters:
-
One or more points of presence in your infrastructure (address, hall, or rack).
-
One or more points of presence in the VK Cloud infrastructure. You can clarify available addresses, hall, and rack by contacting technical support. To create a fault-tolerant connection, it is recommended to use two points of presence.
You can request the current list of presence points from technical support or your personal manager via email at sales-team@mcs.mail.ru.
-
Technology used: dark fiber or carrier VPN service.
-
Connection speed: 1 Gbps or 10 Gbps.
-
-
Contact your telecom partner and arrange an L2 communication channel to VK Cloud using the required technology. The channel is built including cross-connects to the data center racks.
-
Create a request for a Direct Connect connection.
-
After the service is connected, configure L3 Static / BGP routing in your VK Cloud project.